MVK-19

Ultra-High Temperature Polyimide

MVK-19 is an ultra-high temperature polyimide resin with continuous service capability up to 371°C. MVK-19’s excellent thermal stability makes it suitable for use in some of the harshest applications for composite bearings and structures.

MVK-19 does not contain the toxic diamine 4,4’-methylenedianiline (MDA) or any other carcinogenic or mutagenic component. Its chemistry makes MVK-19 most suitable to be processed by compression molding.

MVK-19 was formulated and developed by Maverick, and it has been qualified for use in military and commercial jet engines since 1994. Maverick Molding Company manufactures MVK-19 molded parts in high-rate production at our Blue Ash facility. MVK-19 is available as a resin solution from Maverick Corporation. For more information on MVK-19 molded parts, please contact Maverick Molding Company.

Download Product Data Sheet

Resin Properties

Resin PropertiesTest Parameters Units Typical Values
Solids Content 250°C/180 min cure % 45 - 50
Solution Density (Room Temp.) - g/mL 1.15 - 1.25
Solution Viscosity (Room Temp.) Brookfield spindle #RV-4, 50 rpm cP 1500 - 2500
Glass Transition Temperature TMA (molded part, dry) °C 371 - 385
Thermal Oxidative Stability 371°C, 483 kPa (70 psia), 100 hours % wt loss 2 - 4

Disclaimer: The data listed herein fall within the normal range of properties but should not be used to establish specification limits or used alone as the basis of design. Maverick Corporation assumes no obligations or liabilities for any advice furnished or for any results obtained with respect to this information. All such advice is given and accepted at buyer’s risk.

Back To Top

Section Links

Contact Us





I wish to receive updates from
Maverick Corp.