K-210-1 SMC



Designed for operation temperatures up to 575°F (302°C), Superimide® K-210-1 SMC is a sheet molding compound typically made with 1.0 in long carbon fibers. K-210-1 SMC offers an excellent balance between component affordability and performance. Like all Maverick products, K-210-1 SMC chemistry is non-carcinogenic. K-210-1 SMC components are available exclusively from Maverick Molding Company. K-210-1 SMC has excelent mechanical Properties, low CTE, low coefficient of friction, and high wear resistance, making it suitable for a wide range of bearing and other applications. 


Download Product Data Sheet

For MSDS information please fill out our contact form.

Typical Properties

Mechanical PropertiesTemperatureTest MethodUnitsTypical Values
Tensile StrengthRTASTM D638Ksi43.0
Tensile ModulusRTASTM D638Msi6.5
Tensile Elongation @ BreakRTASTM D638%-
Tensile Strength500°F (260°C)ASTM D638Ksi38.0
Tensile Modulus500°F (260°C)ASTM D638Msi5.4
Tensile Elongation @ Break500°F (260°C)ASTM D638%-
Compressive StrengthRTASTM D695Ksi55.0
Compressive ModulusRTASTM D695Msi4.5
Compressive Strength500°F (260°C)ASTM D695Ksi40.0
Compressive Modulus500°F (260°C)ASTM D695Msi-
Shear StrengthRTASTM D5379Ksi8.3
Shear ModulusRTASTM D5379Msi-
Flexural StrengthRTASTM D790Ksi70.0
Flexural ModulusRTASTM D790Msi4.6
Flexural Strength500°F (260°C)ASTM D790Ksi60.0
Flexural Modulus500°F (260°C)ASTM D790Msi4.0
Physical PropertiesTemperatureTest MethodUnitsTypical Values
 Density RT ASTM D792(g/cm^3) 1.56
 Poisson's Ratio RT ASTMD 638  0.3
 Hardness, Rockwell “E” RT ASTM D785 - -
 Dry Tg RT – 750°F ASTM E1640°F (°C) 635 (335)
 Wet Tg RT – 750°F ASTM E1640°F (°C) -
 Moisture Absorption RT - - -
CTE Parallel to Molding DirectionRT to 450°FASTM E831In-inE-6/°F1.5
CTE Transverse to Molding DirectionRT to 450°FASTM E831In-inE-6/°F15.0
TOS Wt. Loss (100 hrs, 70 psi) 700°F (371°C)E50TF534%-
TOS Wt. Loss (120 hrs, 150 psi) 600°F (316°C)E50TF534%2.5
Wear PropertiesTemperatureTest MethodUnitsTypical Values
Coefficient of FrictionRT to 700°FASTM G99-0.2
Wear @ 30N Load/500 rpm/2 hours400°F (205°C)ASTM G99--
Wear @ 30N Load/500 rpm/2 hours500°F (260°C)ASTM G99--
Thermal ConductivityRTASTM E1225-04BTU/Hrs.ft°F0.17
Thermal Conductivity662°F(350°C) ASTM E1225-05BTU/Hrs.ft°F-
Specific Heat CapacityRTASTM E1269-05W/mK-
Specific Heat Capacity662°F(350°C)ASTM E1269-06J/kg°C-

Disclaimer: The data listed herein fall within the normal range of properties but should not be used to establish specification limits or used alone as the basis of design. Maverick Molding assumes no obligations or liabilities for any advice furnished or for any results obtained with respect to this information. All such advice is given and accepted at buyer’s risk.

Back To Top

Section Links

Contact Us

I wish to receive updates from
Maverick Corp.