K-210

HIGH TEMP · LIGHT WEIGHT · EXTENDED LIFE

GREASE FREE PERFORMANCE

Designed for operation temperatures up to 575°F (302°C), Superimide® K-210 offers an excellent balance between component affordability and performance.  Like all Maverick products, K-210 chemistry is non-carcinogenic.  K-210 components are self-lubricating, eliminating the need for grease.  K-210 has good mechanical properties, low CTE, low coefficient of friction and high wear resistance, making it suitable for a wide rage of bearing applications.  K-210 components are available exclusively from Maverick Molding Company.

Download Product Data Sheet

For MSDS information please fill out our contact form.

Typical Properties

Mechanical PropertiesTemperatureTest MethodUnitsTypical Values
Tensile StrengthRTASTM D638Ksi11.0
Tensile ModulusRTASTM D638Msi1.6
Tensile Elongation @ BreakRTASTM D638%0.9
Tensile Strength500°F (260°C)ASTM D638Ksi7.5
Tensile Modulus500°F (260°C)ASTM D638Msi-
Tensile Elongation @ Break500°F (260°C)ASTM D638%-
Compressive StrengthRTASTM D695Ksi35.0
Compressive ModulusRTASTM D695Msi-
Compressive Strength500°F (260°C)ASTM D695Ksi24.0
Compressive Modulus500°F (260°C)ASTM D695Msi-
Shear StrengthRTASTM D5379Ksi-
Shear ModulusRTASTM D5379Msi-
Flexural StrengthRTASTM D790Ksi16.5
Flexural ModulusRTASTM D790Msi1.6
Flexural Strength500°F (260°C)ASTM D790Ksi12.0
Flexural Modulus500°F (260°C)ASTM D790Msi1.2
Physical PropertiesTemperatureTest MethodUnitsTypical Values
 DensityRTASTM D792 (g/cm^3) 1.54
 Poisson's RatioRTASTM D638-0.3
 Hardness, Rockwell "E"RTASTM D785-  97
Dry Tg °FRT-750°FASTM E1640-635°F
 Wet Tg °F RT-750°FASTM E1640- -
 Moisture AbsorptionRT---
CTE Parallel to Molding DirectionRT-450°F ASTM E831In-inE-6/°F13
CTE Transverse to Molding DirectionRT-450°F ASTM E831In-inE-6/°F10
TOS Wt. Loss (100 hrs, 70 psi)700°F E50TF534%-
TOS Wt. Loss (120 hrs, 150 psi)600°FE50TF534%0.5
Wear PropertiesTemperatureTest MethodUnitsTypical Values
Coefficient of FrictionRT to 700°FASTM G99-0.15
Wear @ 30N Load/500 rpm/2 hours400°F (205°C)ASTM G99µm-
Wear @ 30N Load/500 rpm/2 hours500°F (260°C)ASTM G99µm-
Thermal ConductivityRTASTM E1225-04BTU/Hrs.ft°F-
Thermal Conductivity662°F (350°C)ASTM E1225-05BTU/Hrs.ft°F-
Specific Heat CapacityRTASTM E1269-05W/mK-
Specific Heat Capacity662°F (350°C)ASTM E1269-06J/kg°C-

Disclaimer: The data listed herein fall within the normal range of properties but should not be used to establish specification limits or used alone as the basis of design. Maverick Molding assumes no obligations or liabilities for any advice furnished or for any results obtained with respect to this information. All such advice is given and accepted at buyer’s risk.

Back To Top

Section Links

Contact Us





I wish to receive updates from
Maverick Corp.