SC 610



Superimide® SC-610 is a polyimide composite designed for applications requiring maximum service temperature coupled with superior thermal oxidative stability (TOS).  SC-610 is used for jet engine variable stator vane (VSV) bushings and washers and in other applications at temperatures exceeding 700°F (371°C) where current materials fall short in performance.  SC-610 is an excellent alternative to metals, ceramics and other incumbent materials in high temperature environments. 

Superimide® SC-610 is available exclusively from Maverick as fully certified engineered components designed to exceed customer requirements. 

Download Product Data Sheet

For MSDS information please fill out our contact form.

Typical Properties

Mechanical PropertiesTemperatureTest MethodUnitsTypical Values
Tensile StrengthRTASTM D638Ksi10.8
Tensile ModulusRTASTM D638Msi1.2
Tensile Elongation @ BreakRTASTM D638%1.8
Tensile Strength500°F (260°C)ASTM D638Ksi7.2
Tensile Modulus500°F (260°C)ASTM D638Msi0.6
Tensile Elongation @ Break500°F (260°C)ASTM D638%2.8
Compressive StrengthRTASTM D695Ksi25.0
Compressive ModulusRTASTM D695Msi1.2
Compressive Strength500°F (260°C)ASTM D695Ksi18.7
Compressive Modulus500°F (260°C)ASTM D695Msi0.94
Shear StrengthRTASTM D5379Ksi4.20
Shear ModulusRTASTM D5379Msi-
Flexural StrengthRTASTM D790Ksi14.5
Flexural ModulusRTASTM D790Msi1.0
Flexural Strength500°F (260°C)ASTM D790Ksi9.5
Flexural Modulus500°F (260°C)ASTM D790Msi-
Physical PropertiesTemperatureTest MethodUnitsTypical Values
 DensityRTASTM D792 (g/cm^3)1.50
 Poisson's RatioRTASTM D638-0.24
 Hardness, Rockwell “E”RTASTM D785-84
 Dry Tg RTASTM E1640°F (°C)700 (371)
 Wet Tg RT ASTM E1640°F (°C)650 (343)
 Moisture AbsorptionRT-%1.33
CTE Parallel to Molding DirectionRT to 450°FASTM E831In-inE-6/°F27
CTE Transverse to Molding DirectionRT to 450°FASTM E831In-inE-6/°F16
TOS Wt. Loss (100 hrs, 70 psi)700°F E50TF534%0.9
TOS Wt. Loss (120 hrs,150 psi)600°FE50TF534%-
Wear PropertiesTemperatureTest MethodUnitsTypical Values
Coefficient of FrictionRT to 700°FASTM G99-0.15
Wear @ 30N Load/500 rpm/2 hrs400°F (205°C)ASTM G99µm3.0
Wear @ 30N Load/500 rpm/2 hrs500°F (260°C)ASTM G99µm5.0
Thermal ConductivityRTASTM E1225-04BTU/Hrs.ft°F0.93
Thermal Conductivity662°F (350°C)ASTM E1225-05BTU/Hrs.ft°F1.08
Specific Heat CapacityRTASTM E1269-05W/mK1.45
Specific Heat Capacity662°F (350°C)ASTM E1269-06J/kg°C2.0

Disclaimer: The data listed herein fall within the normal range of properties but should not be used to establish specification limits or used alone as the basis of design. Maverick Molding assumes no obligations or liabilities for any advice furnished or for any results obtained with respect to this information. All such advice is given and accepted at buyer’s risk.

Back To Top

Section Links

Contact Us

I wish to receive updates from
Maverick Corp.